GROUND BUSS BARS
.
Made of .25" thick copper, our ground bar kits
come with stainless steel mounting brackets and
UL recognized standoff insulators.
.
.
Bars may be ordered without the mounting kit.
.
Suitable for Indoor and Outdoor Applications
Questions?  You can email us at the following address:
2" x 10" GROUND BAR KIT
Click on photos below to see exact
dimensions and hole pattern for this bar.
As Pictured:  $49.00
Kit includes (4) bolts
& lockwashers, (2)
brackets, (2)
insulators, as shown
in photo.
Bar Only:  $28.00
For the connection holes, you'll need 1/4" bolts.
4" x 10" GROUND BAR KIT
Click on photos below to see exact
dimensions and hole pattern for this bar.
As Pictured:  $65.00
Kit includes (4) bolts
& lockwashers, (2)
brackets, (2)
insulators, as shown
in photo.
Bar Only:  $44.00
For the connection holes, you'll need 1/4" bolts.
4" x 16" GROUND BAR KIT
Click on photos below to see exact
dimensions and hole pattern for this bar.
As Pictured:  $96.00
Kit includes (4) bolts
& lockwashers, (2)
brackets, (2)
insulators, as shown
in photo.
Bar Only:  $67.00
This bar has both 1/4" and 3/8" connection holes.
4" x 24" GROUND BAR KIT
Click on photos below to see exact
dimensions and hole pattern for this bar.
As Pictured:  $128.00
Kit includes (4) bolts
& lockwashers, (2)
brackets, (2)
insulators, as shown
in photo.
Bar Only:  $99.00
This bar has both 1/4" and 3/8" connection holes.
Need any copper strap jumpers?
.
Anti-oxidant compound?
.
Bronze bolts?
.
You may want to consider some pre-punched jumpers for
connecting equipment to the ground bar.  Silicon bronze bolts,
nuts, and washers are ideal for making ground bar connections.   
And our copper-based anti-oxidant grease will help ensure
trouble-free connections.

Click here to take a look at our strap jumper page.
.
Click here to take a look at our anti-oxidant grease.

Click here to take a look at our silicon-bronze bolts.
6" to 72" strap jumpers are in stock
now in 1" and 1.5" widths.
.
Custom fabrication is available.
This photo shows a one-inch x
six-inch strap jumper with 1/4" holes.
Copyright © 2007-2015 Georgia Copper LLC         All Rights Reserved.
2" x 10" BLANK GROUND BAR KIT
Click on photo below for a closer look.
As Pictured:  $48.50
Kit includes (4) 3/8
bolts & lockwashers,
(2) brackets, (2)
insulators, as shown
in photo.
"Do It Yourself Kit"
You can drill this
ground bar for your
custom configuration.
Thickness is 1/4".
Bar Only:  $27.50
4" x 10" BLANK GROUND BAR KIT
Click on photo below for a closer look.
As Pictured:  $64.50
Kit includes (4) 3/8
bolts & lockwashers,
(2) brackets, (2)
insulators, as shown
in photo.
"Do It Yourself Kit"
You can drill this
ground bar for your
custom configuration.
Thickness is 1/4".
Bar Only:  $43.50
BLANK GROUND BARS
OUR STANDARD GROUND BARS
We stock our two most popular
sizes of ground bars in a
"BLANK" version.   These blank
ground bars have a mounting
hole on each end, but have no
other holes.  

You can drill these to fit your
custom application.

Available as a ground bar kit
with insulators and brackets
included (as pictured), or as a
bar only.
Ground Bars For Mounting
PolyPhaser Protectors
and BulkHead Connectors
Scroll on down this page
to see our Ground Bars
for mounting and grounding
your PolyPhaser Protectors.
4 Hole Ground Bar for Protectors
As Pictured:  $57.00
.
Item no. 7304A
Made of 1/8" copper, tin plated.
Bar Dimensions:
 2.5" x  5.75"
with 1.7" mounting flange.
Includes insulators, stainless steel brackets, and
assembly screws, as shown in photo.  
Protectors or connectors are not included.
6 Hole Ground Bar for Protectors
As Pictured:  $64.00
.
Item no. 7306A
Made of 1/8" copper, tin plated.
Bar Dimensions:
 2.5" x 8.25"
with 1.7" mounting flange.
Includes insulators, stainless steel brackets, and
assembly screws, as shown in photo.  
Protectors or connectors are not included.
8 Hole Ground Bar for Protectors
As Pictured:  $69.00
.
Item no. 7308A
Made of 1/8" copper, tin plated.
Bar Dimensions:  2.
5" x 10.75"
with 1.7" mounting flange.
Includes insulators, stainless steel brackets, and
assembly screws, as shown in photo.  
Protectors or connectors are not included.
10 Hole Ground Bar for Protectors
As Pictured:  $74.00

Item no. 7310A
Made of 1/8" copper, tin plated.
Bar Dimensions:  2.5" x 13.18"
with 1.7" mounting flange.
Includes insulators, stainless steel brackets, and
assembly screws, as shown in photo.
Protectors or connectors are not included.
GROUND BARS FOR POLYPHASER PROTECTORS
What size screws do I
need for my ground bar?
The 2 x 10 and 4 x 10 ground bars are
punched for 1/4" screws.  

The 4 x 16 and 4 x 24 ground bars are
punched for BOTH 1/4" and 3/8"
screws.  Half of the holes are 1/4" and
half are 3/8".
Click here to visit our hardware page,
where you can find the bolt kits you
need to make connections to your
ground bar.

ABOUT TRUST ONLINE
We've improved our popular
ground bars for coaxial protectors
!

These 4, 6,
8, and 10 hole ground
bars for PolyPhaser protectors
have proven very popular.
T
he "A" suffix designates our new
improved version.  Holes are spaced
slightly farther apart.  The mounting
flange at the bottom of the bar is now
wider (1.7").


Gary Smith - July, 2015
Ground and protect your
coaxial cables.

These ground bars are designed for
the mounting and grounding of
PolyPhaser IS-B50 bulkhead style
coaxial protectors, as well as SO239
and N bulkheads.  Each kit includes
the ground bar (made of 1/8" copper,
tin plated), two insulators, two stainless
steel brackets, and assembly screws.  
Bulkhead connectors or PolyPhaser
protectors are NOT included.